Pavers Are Different From a Monolithic Concrete Slab
Paver surfaces contain individual units and joints, which means sand condition, movement and drainage can affect the project in ways a single slab does not. The sealing scope should look at both the face of the pavers and what is happening between them.
This page stays focused on sealing rather than paver installation or major base repair.
Cleaning Can Change the Appearance Before Sealing
Outdoor pavers can darken from dirt, algae and other buildup. Cleaning may reveal that the original color is still present or may expose worn areas and previous sealer. Where appropriate, Pressure Washing can be part of preparation.
The pavers should be allowed to reach the condition required by the selected sealer before application.
Existing Sealer Should Be Identified
A paver surface may have an older coating that has worn unevenly, turned hazy or changed appearance. New sealer can react differently depending on what remains. Compatibility should be considered rather than stacking an unknown system over an old one.
Removal or additional preparation may be needed when previous material is failing.
Joint Sand and Movement Are Separate From the Surface Finish
Missing or disturbed joint material can affect the appearance and stability of the paver field. Sealing should not be used to hide movement or a failing base. The condition of the pavers should be suitable before the protective finish is applied.
Major resetting, drainage correction or base repair remains outside an ordinary sealing scope unless separately approved.
Sheen and Color Enhancement Are Appearance Decisions
Some sealers leave a more natural look while others can deepen color or add visible sheen. The customer should decide what appearance is desired before the system is selected. Test areas or product guidance can help set expectations where color enhancement is important.
Pool and Driveway Pavers Have Different Use Conditions
Vehicle traffic, pool water, foot traffic and sun exposure can create different maintenance needs. The surface use should be part of the sealer decision. Standing-water or broader moisture issues may require a different service rather than relying on sealer alone.
For the broader service family around this task, Concrete, Floors & Outdoor Finishes shows the parent scope and neighboring options without expanding this page beyond its purpose. If moisture protection or rain entry becomes the primary problem, waterproofing should be evaluated before a finish-only solution is selected. When the substrate needs mechanical preparation beyond routine sanding, mechanical surface preparation covers the grinding or abrasive-preparation stage.
FAQ
Does paver sealing fix loose or sunken pavers?
No. Resetting or base repair is separate from sealing.
Can old sealer be covered with new sealer?
Possibly, but compatibility and the condition of the existing finish should be reviewed first.
Does sealing change the paver color?
Some systems can enhance color or add sheen, while others are less visually noticeable.
Where is paver sealing available?
FL-GoodHome serves Hollywood, Broward County and nearby South Florida.